1. Home
  2. Knowledge Base
  3. MG Mini – Button Pairing

MG Mini – Button Pairing

  1. Use the Info button on the side of the device- Push it three (3) times to enter pairing mode

  2. The device will state, “Entering Pairing Mode, Press the Button on the Peripheral to Connect to the Device.” 

  3. The user should press the peripheral button for 3 seconds which will initiate a pairing signal to the unit. 

  4. When the pairing has been completed, the device will state, “Pairing Completed.”  

  5. The pendant has been paired to the unit and can be used to initiate an alarm.

  6. Test the device by pressing the button to ensure a successful pairing.