Testing Your On-the-Go

STEP 1: Test your On-the-Go Guardian

  • Remove your On-the-Go Guardian from its charging cradle.
  • Press and hold the Emergency SOS call button on your On-the-Go Guardian until the light around the button turns blue and the device vibrates.
  • After a short delay, you will hear tones or ringing and a voice message.
  • An operator will ask if you need help. Please state that you are just testing.
  • Once the operator confirms the test, they will disconnect the call.

Once the operator confirms the test, they will disconnect the call.

Was this article helpful?